Bootvorgang - Kernel - Beispiel

Linux version 2.2.10 (root@beratest1.rus.uni-stuttgart.de) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #3 SMP Wed Jun 16 23:48:23 CEST 1999
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 400922576 Hz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 399.77 BogoMIPS
Memory: 517536k/524224k available (812k kernel code, 416k reserved, 5420k data, 40k init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au)
per-CPU timeslice cutoff: 100.23 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ... 
..... CPU clock speed is 400.9323 MHz.
..... system bus clock speed is 100.2329 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 400.59 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (800.36 BogoMIPS).
enabling symmetric IO mode... ...done.
PCI: PCI BIOS revision 2.10 entry at 0xf0730
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
   pII_mmx   :   968.502 MB/sec
   p5_mmx    :   927.354 MB/sec
   8regs     :   691.515 MB/sec
   32regs    :   434.340 MB/sec
using fastest function: pII_mmx (968.502 MB/sec)
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 374 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4
       <Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
  Vendor: IBM       Model: DDRS-34560D       Rev: DC1B
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 15.
  Vendor: IBM       Model: DDRS-34560D       Rev: DC1B
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
(scsi0:0:2:0) Synchronous at 80.0 Mbyte/sec, offset 15.
  Vendor: IBM       Model: DDRS-34560D       Rev: DC1B
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
(scsi0:0:6:0) Synchronous at 20.0 Mbyte/sec, offset 15.
  Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi : detected 3 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
Partition check:
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
 sdb: sdb1 sdb2
 sdc: sdc1 sdc2
md.c: sizeof(mdp_super_t) = 4096
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 40k freed
Adding Swap: 132092k swap-space (priority 2)
Adding Swap: 128484k swap-space (priority 2)
Adding Swap: 128484k swap-space (priority 2)
Adding Swap: 132092k swap-space (priority 1)
(read) sdb2's sb offset: 4329408 [events: 00000023]
(read) sdc2's sb offset: 4329408 [events: 00000023]
autorun ...
considering sdc2 ...
  adding sdc2 ...
  adding sdb2 ...
created md0
bind<sdb2,1>
bind<sdc2,2>
running: <sdc2><sdb2>
now!
sdc2's event counter: 00000023
sdb2's event counter: 00000023
raid0 personality registered
mask ffffff00
 rdev->size: 4329216
 masked rdev->size: 4329216
  new md_size: 4329216
 rdev->size: 4329216
 masked rdev->size: 4329216
  new md_size: 8658432
md0: max total readahead window set to 2048k
md0: 2 data-disks, max readahead per data-disk: 1024k
raid0: looking at sdb2
raid0:   comparing sdb2(4329216) with sdb2(4329216)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc2
raid0:   comparing sdc2(4329216) with sdb2(4329216)
raid0:   EQUAL
raid0: FINAL 1 zones
zone 0
 checking sdb2 ... contained as device 0
  (4329216) is smallest!.
 checking sdc2 ... contained as device 1
 zone->nb_dev: 2, size: 8658432
current zone offset: 4329216
done.
raid0 : md_size is 8658432 blocks.
raid0 : conf->smallest->size is 8658432 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: updating md0 RAID superblock on device
sdc2 [events: 00000024](write) sdc2's sb offset: 4329408
sdb2 [events: 00000024](write) sdb2's sb offset: 4329408
.
... autorun DONE.

Letzte Änderung am Sam Nov 20 12:59:44 CET 1999 von Heron